![]() 1 Quart treats approx 100 sq ftĭiluted with water and used at room temperature as an immersion “oxidizing” solution. For immersion use, dilute 30% Alodine 1201 to 70% water. This chrome conversion coating offers the best affordable substrate for both paint adhesion and corrosion resistance. The coating formed by Alodine® 1201™ is gold to tan in color and it becomes a part of the aluminum surface. Nonflammable, chromic acid-based, coating chemical that will produce a chrome conversion coating on aluminum and its alloys. These colors are dependent upon substrate, immersion time and concentration. Produces gun metal blue, black, brown and slight purple on copper, brass, bronze, white metals, silver and tin lead alloys. The color produced can be varied from light brown to brown to black.ĭiluted with water and used at room temperature as an immersion “oxidizing” solution. The subsequent A316 finish will adhere better to the brown finish than it will to bare copper or brass surfaces.Īn instant-acting swab-on/touch-up chemical conversion finish for copper and its alloys. The natural looking finishes are produced by first treating the copper or brass surfaces with A311 to produce a brown finish. Used full strength or diluted with water to produce a natural verdi or patina green or bluish color on copper alloys. It is also used to blacken Silver and Nickel. Used at the same dilution as 311 and 312 with copper and brass, but the highlighted finishes do not exhibit any underlying red tones. Diluted 5% to 10% by volume solutions produce very light brown tones. Used at 20% by volume solutions produce more pronounced brown to chocolate brown colors on copper and brass than 311, with a richer reddish tone when highlighted. Desirable underlying red tones revealed upon highlighting the brown tones. Diluted 5% to 10% by volume solutions produce lighter finish and statuary bronzes with 1 to 3 minutes of immersion. Used at 15% to 20% by volume solutions produce black to blackish-brown US 10B finishes on copper and brass with immersions of 1 to 3 minutes. Gives a bronze to black color on copper and silver parts. Gives a pleasing Tiffany Green affect on copper parts. Seal with Caswell Sealer for extra protection Room Temperature Blackener for stainless steel. Seal with Penetrating Sealer for oily finish, or Caswell Sealer for dry finish Room temperature blackener for Steel & Iron. Steel or Iron | Stainless Steel | Copper | Brass | Bronze | Aluminum | Tin or Pewter | Silver | Nickel | Zinc or Cadmium Steel or Iron Sample The following Caswell Antiquing/Metal Finishing Solutions work on the following base metals: Caswell Antiquing - Metal Finishing Solutions Selection Tool
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |